Boat Repair Guide in San Diego

No Comments

Boat Repair Guide in San Diego

Related image

 

If you’re a boat lover you will be constantly amazed by the number of boat owners who simply smeared some caulking around the frames of the window which are badly leaking. Let’s discuss why is this a suicide for the boat, this silly process can not only make a mess of your valuable boat & it is a complete waste of time.

Finding the point of origin of the leak is difficult. As many boats are so badly designed that no matter what you attempt to fix, you are at some point not able to stop the leaks.

How to find the leak

The window frames are the only thing holding up the flying bridge.

The side decks are weak, and when you walk on them, it pulls the deck and house side away from the window frame.

The frame is not channelized but consists of just the frame and glass clamped against the house side with screws.

The window frames are black and you live in the south.

 

If you have a boat which is very poorly designed where you notice that the window frames are holding up the bridge, or a very low to side decks & the flexes when you walk on it, it is not like you can stop the leaks on the windows by recaulking. This could be caused because of the poor design of the boat & you could be pretty much stuck with.

If you don’t want to waste the quality time in finding out the leaks which could take hours then simply call for San Diego Boat Repair for immediate help.

San Diego Boat Repair

San Diego Ave, San Diego, CA 92110

(619) 317-0649

Parking Lot Striping Near Me

No Comments

Parking Lot Striping Near Me In Houston

When you decide to get Front Line Parking Lot Striping then you would definitely need some help. If you decide to do it yourself then you need some machinery like striping machine, blower etc.

Once you have a possession of a Striping Machine then unload it near grass & it would be nice if you have access to water also near the unloading spot.

Now once you unload the Striping Machine, you need to power up the machine & start stripping as it is always a good idea to stripe in a logical progression. Let’s take an example if you have a striping job for a nose to nose parking lot job with a center line dividing both the rows of cars then you should avoid striping the center lying first. Why? If you did stripe the center lining first then you would have to wait for a minimum of 15 minutes for it to dry before you could stripe the next line. Instead of that you can do the long stripes first like do the 40-foot lines to the end & roll back to the other end of the line & then do the one center to finish that following section. Give it some wait to dry a little for the last lines to dry. If you don’t want to waste time by waiting then you can do some few stripes through the next section the roll back to this section to finish the center line.

If you think this is too much for you to handle. There is always an option to call for professionals who can do the job for you.

Call for an expert help today:

Frontline Striping

Address: 5510 Old Greenhouse Rd, Houston, TX 77084

Phone: (832) 566-0322